The Linksys PAP2T-NA is a SIP analog terminal adapter. It has one RJ45 Ethernet interface to connect to your data network and two RJ11 FXS interfaces to connect to analog devices such as analog telephones or fax machines. Each analog port on the PAP2T-NA must be configured as an individual extension in Evolution PBX.

Configuring the Linksys PAP2T-NA Adaptor

1. Connect the 5V adapter to Linksys PPAP2T-NA, connect the Ethernet network, and then connect an analog telephone to one of the ports labeled PHONE 1 and 2.

2. Dial **** on your analog phone, enter 110# and the IP Address the Linksys PAP2T-NA adaptor acquired from your network is given.
3. Write down the IP Address, open a Web Browser then enter the IP Address (for example, http://192.168.2.71) into the Address bar.
4. Press Enter and the Info tab of the Linksys Telephone Configuration window displays.
5. Click Admin Login, click switch to advanced view then click Line 1 to configure the SIP settings.
6. In the Line Enable field, select yes.
7. In the SIP Port field, enter 5060.
8. In the Proxy field enter Evolution PBX’s IP Address (for example, 192.168.165.100).
9. In the Register field, select yes.
10. In the User ID field, enter the extension number (for example, 1020).
11. In the Password field, enter the password provided by Evolution PBX you wrote down when you created your default extension.
12. In the Use Auth ID field, select No.
13. Click Save Settings and the telephone will save, reboot, and automatically register with Evolution PBX.